For installation
on light-weight grille and shutter applications with
minimal over-travel. Use on or near gates for pinch
point protection.
 |
 |
For installation
on barrier gate arms, attach the rigid PVC mounting
channel and slide sensor into the channel.
|
 |
Call for Dealer/ Retail Pricing
775-588-1475
 |
Call for Dealer/ Retail Pricing
775-588-1475
 |
The ME123 is
designed for use on 1-1/2 to 2 inch thick doors and
gates. To install; slide the edge into the mounting
channel and then mount the assembly to the door.
|
 |
The MGO20 is designed for use on doors and gates up
to 1-1/2 inches thick. To install, simply attach the
rigid PVC or aluminum mounting channel and slide
sensor into the channel. This edge cannot be bent or
folded. |
 |
Call for Dealer/ Retail Pricing
775-588-1475
|
Call for Dealer/ Retail Pricing
775-588-1475 |
The Miller Edge Model MWT02 gate and door edge transmitter is designed to
provide obstacle sensing protection for a variety of motorized gates and
doors. |
 |
The Miller Edge Model MWTA02 gate and door edge
transmitter is designed to provide obstacle sensing
protection for a variety of motorized gates and doors.
The Model MWTA02 is available with an Audible Alarm
feature that activates when the battery has only 25%
of its life remaining, indicating the battery should
be replaced. |
 |
Call for Dealer/ Retail Pricing
775-588-1475 |
Call for Dealer/ Retail Pricing 775-588-1475 |
Both the Miller Edge receiver and transmitters are
designed to have several selectable options not found
on other radio controls. Simply select these options
with the convenient dip switches and wire harness. The
receiver will operate on either 12 or 24 volt AC or DC
and is capable of sending a pulse or continuous
signal. |
 |
Both the Miller Edge receiver and transmitters are
designed to have several selectable options not found
on other radio controls. Simply select these options
with the convenient dip switches and wire harness. The
receiver will operate on either 12 or 24 volt AC or DC
and is capable of sending a pulse or continuous
signal. |
 |
Call for Dealer/ Retail Pricing
775-588-1475 |
Call for Dealer/ Retail Pricing
775-588-1475
|
